Platform Rattle

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Newbegginer
    Speed Bag Trainee
    • Jan 2019
    • 20

    Platform Rattle

    I’ve seen some nice platforms that probably have little rattle to them. However, for some of us who like to keep things inexpensive and improvise, reducing platform rattle can be a hassle. I’ve heard things like a bag of sand, weight plates I top of foam, additional custom platforms, etc. Has anyone come up with a reasonable solution to this dilemma while not compromising the platforms integrity?
  • LouisvilleBagr
    Speed Bag Guru
    • Jun 2019
    • 328

    #2
    Originally posted by Newbegginer View Post
    I’ve seen some nice platforms that probably have little rattle to them. However, for some of us who like to keep things inexpensive and improvise, reducing platform rattle can be a hassle. I’ve heard things like a bag of sand, weight plates I top of foam, additional custom platforms, etc. Has anyone come up with a reasonable solution to this dilemma while not compromising the platforms integrity?
    I use the Everlast DE01 bag anchor. It’s on Amazon for $13, but you may be able to find one cheaper? I didn’t really shop around.
    Anyway, it comes with a water bladder, I take that out of the zippered housing. I fill a thick garbage bag with play sand ($1 and some change at Home Depot for a 50lb bag). Be sure to leave a little room in the bag for the sand to spread out. Then I put bag pull of sand in the housing and zip it up. Drop it on the ground a few times and the sand will even out. It’s about 24 inches around, so depending on your rig, it should cover the platform nicely. I’d say you could probably squeeze 75 pounds of sand in one if you really maxed it out. I put 50-60 in mine, fits my rig. You can obviously put more or less as needed.

    If you don’t want to spend anything, just get a garbage bag, double or triple it up. Fill it with dirt or sand from the yard as needed leaving enough room in the bag for it to spread a little. Slap that sucker on top of your platform. Next thing you know old Jed’s a millionaire!
    Attached Files
    Last edited by LouisvilleBagr; 07-16-2019, 06:06 PM.

    Comment

    • BagBoy
      Speed Bag Guru
      • Jan 2018
      • 861

      #3
      I built mine from the ground/floor up. Free standing and sturdy. No rattle or shaking to speak of. Thing is really quiet too. The one wall mount I have does have a sandbag on it and it's also braced to the floor joists as well so it does vibrate in that you can hear it throughout the house but it doesn't rattle.
      Certifiable SBX Attendee 2019

      @SpeedBagaZebo

      Comment

      • Cazbag
        Speed Bag Guru
        • Sep 2018
        • 382

        #4
        Abooot how far is the free standing from the wall?

        Comment

        • morphiusrt
          Member
          • Mar 2019
          • 47

          #5
          I think sand bag is a must. I put mine in an old gym bag and put it on top. I was still having some vibration issues so I added a Dewalt trigger clamp. You can actually turn it backwards and make it into a spreader and it made a world of difference. Attached is a photo of my setup. You can see the clamp on mine and my wifes in the background. If you don't have ceiling like this than you would maybe need to use a 2x4 or something.

          Dewalt Trigger Clamp
          Attached Files

          Comment

          • BagBoy
            Speed Bag Guru
            • Jan 2018
            • 861

            #6
            Originally posted by Cazbag View Post
            Abooot how far is the free standing from the wall?
            You can't use my jokes without the expressed written consent of ME! The thing is 1.5 inch's from the three surrounding walls. As I mentioned in Hazlet, I use the top as a bunk bed.
            Certifiable SBX Attendee 2019

            @SpeedBagaZebo

            Comment

            • Newbegginer
              Speed Bag Trainee
              • Jan 2019
              • 20

              #7
              Thanks for all the helpful advice. I hope that anyone else having similar issues is able to use this thread for their own use.

              Comment

              • UK mark
                Senior Member
                • Nov 2018
                • 195

                #8
                Originally posted by morphiusrt View Post
                I think sand bag is a must. I put mine in an old gym bag and put it on top. I was still having some vibration issues so I added a Dewalt trigger clamp. You can actually turn it backwards and make it into a spreader and it made a world of difference. Attached is a photo of my setup. You can see the clamp on mine and my wifes in the background. If you don't have ceiling like this than you would maybe need to use a 2x4 or something.

                Dewalt Trigger Clamp
                Hey your platform looks awesome in that finish , what is it if u don't mind me asking

                Comment

                • morphiusrt
                  Member
                  • Mar 2019
                  • 47

                  #9
                  Originally posted by UK mark View Post

                  Hey your platform looks awesome in that finish , what is it if u don't mind me asking
                  Sorry I just saw this. It is actually a vinyl wrap material. I own a car vinyl wrapping business. I am planning to do something with my wifes drum and when I do I am going to make a video to share on here.

                  Comment

                  • UK mark
                    Senior Member
                    • Nov 2018
                    • 195

                    #10
                    Wow guessing you could have some amazing colours then

                    Comment

                    Speedbagforum.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
                    Working...