Hello,
I need your enlightened advices about my "title" speedbags and the "forza mma" swivel (sorry for my english):
- First of all, I feel that my 3 "title" speed-bags have a slight problem of shape which causes problems of rebounds on the board. 1 "gyro title", 1 "fighting sport" and 1 "black title". This is a single order from the website 'title boxing' They do not have a homogeneous round shape so that they bounce badly.
I changed the bladders several times to check the problem. I have trouble getting the tip of the bladder valve into the speed-bags hole, but I do not think that's the only problem (but i'm not sure, I can not push it perfectly through the hole...) Clearly there is one side of the speedbags that is wider than the other in relation to the loop. I have two "cleto-Reyes" which I also changed the bladders and there is no problem, everything is perfectly straight and bounces smoothly.
I give you below the photos of the speed-bags so that you can tell me what you think. In your opinion, is this only a bladder installation problem? I added a video where I try to show the weird bounce. My skills are not in question here: with cleto reyes there is no problem and I'm sure it's not a banana vs pear shape problem.
- I also have questions about the forza mma swivel that I received:
2 things :
1: The iron ring of the hook is not perfectly round, which I think adds problems of rebounds. I added a photo. What do you think? is this normal? I also have an everlast plastic swivel, which is perfectly centered, and I have no problem with the rebound (apart from the speed-bag problems I mentioned above of course)
2: the hook unscrews constantly (see photo). It is impossible to block it.... After 30s the speed bag falls systematically ...
In short I am rather disappointed with this swivel. I prefer, for now, the everlast plastic swivel, even with the carabiner instead of the S-hook.
What do you think?
I need your enlightened advices about my "title" speedbags and the "forza mma" swivel (sorry for my english):
- First of all, I feel that my 3 "title" speed-bags have a slight problem of shape which causes problems of rebounds on the board. 1 "gyro title", 1 "fighting sport" and 1 "black title". This is a single order from the website 'title boxing' They do not have a homogeneous round shape so that they bounce badly.
I changed the bladders several times to check the problem. I have trouble getting the tip of the bladder valve into the speed-bags hole, but I do not think that's the only problem (but i'm not sure, I can not push it perfectly through the hole...) Clearly there is one side of the speedbags that is wider than the other in relation to the loop. I have two "cleto-Reyes" which I also changed the bladders and there is no problem, everything is perfectly straight and bounces smoothly.
I give you below the photos of the speed-bags so that you can tell me what you think. In your opinion, is this only a bladder installation problem? I added a video where I try to show the weird bounce. My skills are not in question here: with cleto reyes there is no problem and I'm sure it's not a banana vs pear shape problem.
- I also have questions about the forza mma swivel that I received:
2 things :
1: The iron ring of the hook is not perfectly round, which I think adds problems of rebounds. I added a photo. What do you think? is this normal? I also have an everlast plastic swivel, which is perfectly centered, and I have no problem with the rebound (apart from the speed-bag problems I mentioned above of course)
2: the hook unscrews constantly (see photo). It is impossible to block it.... After 30s the speed bag falls systematically ...
In short I am rather disappointed with this swivel. I prefer, for now, the everlast plastic swivel, even with the carabiner instead of the S-hook.
What do you think?
Comment